Track Mount

A different tool for a different job.

Our First 100 Track Mounts are almost sold out, when they do we will be traking pre-orders for next batch due in mid October

The Outback Comms Track Mount is built for the times you want your Starlink Mini mounted quickly, securely and without permanently fixing anything to your vehicle.

Using four heavy-duty, rubber-coated magnets, the Track Mount attaches directly to suitable steel vehicle roofs, toolboxes and other flat steel surfaces. No drilling. No bolts. No permanent mounting hardware. Simply fit your Starlink Mini into the cradle, position the Track Mount and you're ready to go.

Designed and manufactured by Outback Comms, the lightweight powder-coated aluminium chassis uses four captive retainers to keep the Starlink Mini positioned securely within the mount, while rubber-coated magnet feet help protect the mounting surface.

It's made for paddock work, properties, campsites, private tracks and short low-speed off-road movements where the ability to quickly fit and remove your Starlink Mini is the priority.

When you're finished, lift it off and pack it away. Simple.

Designed for Off-Road, No magnet mount is designed or suitable for the Highway, THEY WILL HOLD ON, till they don't.

The Track Mount has a very specific job, and highway travel isn't it.

Magnetic holding performance can be affected by vehicle speed, vibration, surface condition, heat, dust, roof curvature and other environmental factors.

The Track Mount is designed fand sold for off-road use only and is not designed or rated for use on public roads.

If you need a permanently mounted solution for normal road and highway travel, check out our Mini Tough Mount or Mini Lite Mount instead.

Why Track Mount?

• Fit and remove in seconds – no drilling or permanent vehicle modification
• Four-magnet mounting system for suitable steel surfaces
• Rubber-coated magnet feet help protect vehicle paintwork
• Powder-coated aluminium construction – lightweight, tough and corrosion resistant
• Captive aluminium retainers keep the Starlink Mini centred within the cradle
• Low-profile design at approximately 50 mm high
• Ideal for paddocks, farms, worksites, campsites and private tracks
• Easy to remove when the Starlink Mini isn't required
• Designed specifically to house a Starlink Mini
• Australian designed by Outback Comms

Important Fitment Information

The Track Mount requires a suitable ferrous steel mounting surface. It will not magnetically attach to aluminium, composite, fibreglass or glass roof panels.

For best performance, the mounting surface should be clean, flat or gently crowned and provide full contact across all four magnetic feet. Holding force may be reduced on strongly curved, uneven, dirty or damaged surfaces.

⚠ Important Safety Information

OFF-ROAD USE ONLY.

The Track Mount is not designed or rated for use on classified roads, sealed public roads or highways at any speed. At highways speeds, the mount is will hold on, but in an accident, the mount CAN dislodge from 35klms.

Always inspect the mounting surface, magnets, mount and Starlink Mini attachment before moving the vehicle. Ensure all four magnets are fully seated on a suitable steel surface.

An improperly fitted or unsecured mount may detach during sudden braking, impact or vehicle movement, creating a risk of serious injury, death or property damage.

For normal road or highway use, choose an appropriate permanently secured Outback Comms mounting solution.

Specifications

Overall Dimensions: 343.8 × 415.5 mm over magnets

Chassis Footprint: 332.8 × 381.9 mm

Mount Weight: Approx. 1.08 kg

Approx Installed weight: 2.18 kg including Starlink Mini

Chassis: 2.5 mm powder-coated aluminium

Magnets: 4 × rubber-coated neodymium pot magnets (25kg rated pull each)

Mounting surface: Ferrous/steel surfaces only

Fixings: Bolted throughout, rigid assembly

Best For

Paddock work • Farms & stations • Private property • Campsites • Worksites • Private tracks • Low-speed off-road travel • Temporary Starlink Mini installations